Fitting Cat Flap in UPVC Door Panel > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come as they please, without you having to let them in or out. They also help prevent your cat from toileting in the house.

Installing a cat flap into a upvc door panel is a lot easier than a glass door, however it will require some expertise and the right tools.

Take a measurement of the door

Fitting a cat flap in a door can be tricky but if you select the right kind of cat flap be patient and follow the instructions provided it should not prove to be a problem. We will help you draw the shape using the jigsaw to cut the door's opening. Then we'll complete the job by attaching the flap. This will ensure that the flap stays in place and protects the door from rain and wind which can cause damage.

The first thing to do is determine the width of your pet in order to determine an accurate estimate of the size of cat flap you will need. This will ensure that the flap is large enough that your pet can go inside and out of the house without needing to open and close the door each time, but it is also small enough to stop them from moving too far either way.

Once you have the measurements you can mark out the area on the door where the template should be positioned, typically this is done using an X, but some kits include a drawing that shows where to drill, if you have one, then attach it to the door and use a pencil to draw around the door. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and the moulding or sill.

Then put on your eye protection and dust mask. Then using a jigsaw, begin cutting according to the lines you have pencilled in. Don't press the blade too hard as this could cause it to cut faster than you want it to. If you own a set square then make use of it to verify whether you're cutting in the right way and also to ensure that the hole is a good rectangle shape, once you are satisfied with this you can begin to take off the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them being a nuisance to visitors or leaving unwelcome gifts in the house. It also helps prevent draughts and keeps your home's temperature steady. fitting cat flap in upvc door panel a cat flap to your door may seem daunting to those who haven't done it before. Many people call an expert carpenter or joiner to do the job. This is a viable option, however you can do it yourself if your tools are appropriate and the directions are followed.

While this is much simpler to accomplish when using a timber door it is still possible to do this in uPVC doors - although you should be careful to avoid damaging the doors, as this can end the warranty. First, you need to examine the door's measurements to ensure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However, if your door is made of composite or another kind of door, you may require more care.

The next step is to determine the height of your cat's stomach. This is the distance from the floor to the bottom of the cat's stomach and you will need to find a spot on the door that will be within the range your pet can comfortably go through. Once you've figured out the measurements, you'll be required to mark the space using a spirit level and a pencil so you know the opening will fit your window cat flap.

After you have marked the area, it is time to make the hole. It is crucial to be patient and use a jigsaw ensure that the cuts are clean and smooth not rough and uneven. This could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask at all times when using the jigsaw, since inhaling the sawdust can be dangerous to your health. After you've finished the cutting, you will have to smooth out the edges of the hole using sandpaper, so that your cat flap can be fitted easily.

Cut a hole

Getting a cat flap fitted into an existing door panel or double glazing cat flap glazing sealed unit is quite difficult. If you are not very proficient in DIY, it's recommended to hire an expert to do the job for you. A mistake in the process may not just be ugly, but also an issue for security as well as allowing cold air to enter when the cat flap in bifold doors is outside, and hot air to escape inside.

The first thing you need to do is draw the location of the hole in the door with pencil and an ax level. This will ensure that it is correctly placed and runs parallel to other parts of the door. Make sure you have a piece of sandpaper at hand for any rough edges.

After the line is traced, you must cut the hole with a jigsaw. Be sure to wear the appropriate safety equipment for working with a power tool. If you're worried about the noise, you can purchase a jigsaw with a cord that is quieter and more user-friendly.

You should only remove the material that is required to make the flap. A small amount of material will be required for the thickness of the wall of the cat flap itself but removing more than that can cause problems and even cause damage to the door frame.

A door made of upvc could contain a metal frame or panel within it which could block the microchip cat flap if this is the case, you will need to cut an over-sized hole to ensure that the metal doesn't get in contact with the the cat flap. If this is done, it is important to fill in the gap and seal it with water.

If you want to install a cat flap inside windows made of double-glazed or upvc with metal frames it is necessary to speak with a specialist. They will offer you a brand new piece of glass that has the hole already pre-made for the cat flap. This is less expensive than fitting a cat flap inside an existing pane of glass that was not designed for this purpose.

Place the Flap

Cat flaps let your pet move around as they please, giving them the freedom to relax inside the house whenever they're feeling like it. However, if you have a uPVC door it can be difficult to put in a cat flap, particularly when you don't have a glass pane that can be cut to accommodate one. Luckily, if you're happy to buy and install a replacement half-glazed uPVC panel then it is possible to fit the cat flap to the doors. It's not as simple as simply making a hole in the door though and there are a few things you'll need first to make sure it's safe.

A composite, uPVC, or GRP door panel is usually made up of a thin plastic skin that is attached to an insulating polystyrene base. It is crucial to be cautious when cutting the material. This kind of door has a template you can use to cut the hole.

After you have marked out the opening in your front door, it is time to install the cat flap. You can buy and fit various models, from basic push-button operated ones to microchip activated units that only let in your pet. Whatever kind of cat flaps you choose it's essential that your cat can use the flap without getting stuck in the rain.

It's a good idea to opt for circular fittings rather than a square one, as circles are more securely cut into the door glass. This is because square holes are more likely to crack the glass when they're drilled. This is also a safer option because you won't need to drill into the toughened glass which could break and cause harm to your pet or family members. This is especially crucial if you have elderly or children living in your home who could be injured by glass fragments.